OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) M processor 2.00GHz ("GenuineIntel" 686-class) 2 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2 cpu0: Enhanced SpeedStep 2000 MHz (1356 mV): speeds: 2000, 1600, 1333, 1067, 800 MHz real mem = 536305664 (523736K) avail mem = 481263616 (469984K) using 4256 buffers containing 26918912 bytes (26288K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(5f) BIOS, date 07/12/04, BIOS32 rev. 0 @ 0xea800, SMBIOS rev. 2.3 @ 0xeb160 (25 entries) bios0: Acer Dunlin pcibios0 at bios0: rev 2.1 @ 0xe6000/0x6f9 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe840/288 (16 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev 0x00) pcibios0: PCI bus #5 is the last bus bios0: ROM list: 0xc0000/0xf400! 0xdd000/0x1400! 0xe0000/0x2000! 0xe5000/0x1000! 0xeb000/0x5000! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82915PM/GM PCIE" rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0148 rev 0xa2 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04 pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04 pci3 at ppb2 bus 3 uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 11 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 11 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: irq 11 usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: irq 11 ehci0: reset timeout ehci0: init failed, error=13 ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4 pci4 at ppb3 bus 4 "TI TSB43AB21 FireWire" rev 0x00 at pci4 dev 0 function 0 not configured bge0 at pci4 dev 1 function 0 "Broadcom BCM5788" rev 0x03, BCM5705 A3 (0x3003): irq 11, address 00:0f:b0:97:7b:d9 brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2 iwi0 at pci4 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 11, address 00:12:f0:d2:60:bb cbb0 at pci4 dev 4 function 0 "ENE CB-712 CardBus" rev 0x10pci_intr_map: no mapping for pin A : couldn't map interrupt vendor "ENE", unknown product 0x0530 (class memory subclass flash, rev 0x01) at pci4 dev 4 function 1 not configured sdhc0 at pci4 dev 4 function 2 vendor "ENE", unknown product 0x0550 rev 0x01: irq 5 sdmmc0 at sdhc0 vendor "ENE", unknown product 0x0520 (class memory subclass flash, rev 0x01) at pci4 dev 4 function 3 not configured vendor "ENE", unknown product 0x0551 (class memory subclass flash, rev 0x01) at pci4 dev 4 function 4 not configured auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x04: irq 5, ICH6 AC97 ac97: codec id 0x414c4752 (Avance Logic ALC250A?) ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo audio0 at auich0 "Intel 82801FB Modem" rev 0x04 at pci0 dev 30 function 3 not configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility atapiscsi0 at pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: SCSI0 5/cdrom removable cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 wd0 at pciide0 channel 1 drive 0: wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: irq 11 iic0 at ichiic0 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384 pcic0 controller 0: has socket A only pcmcia0 at pcic0 controller 0 socket 0 pcic0: irq 9, polling enabled biomask ed65 netmask ed65 ttymask ffe7 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302